Hide Every Wire.
Love Every Room.

Yes — EVZA uses 3M-grade double-sided adhesive tape that bonds strongly to most smooth wall surfaces including painted drywall, plaster, tiles, and wood. For textured walls or extra security, we include screw holes in every raceway base as a backup mounting option. Surface must be clean and dry for best adhesion.

Yes. To remove, heat the adhesive strip with a hair dryer for 20–30 seconds to soften the bond, then peel away slowly at a flat angle. Any minor residue can be cleaned with rubbing alcohol. EVZA is designed to be renter-friendly — no permanent damage when removed correctly.

The Slim raceway (16×12mm) comfortably fits 1–2 standard cables (e.g., one HDMI + one power cord). The Wide raceway (25×16mm) fits 3–4 standard cables. Thicker cables like power strips or extension cords may reduce capacity by one slot. Flat HDMI cables and thin USB cables can often be doubled up.

Absolutely — all EVZA raceways have a smooth matte surface that accepts standard latex wall paint. Apply a light primer coat first for best results, then paint to match your exact wall color. Once painted, the raceway practically disappears into the wall.

Each kit contains 7 raceway sections for a total installed length of approximately 110 inches (about 9 feet). This is enough to run cables from a wall-mounted TV down to the floor and along the baseboard. Corner pieces, end caps, and joint connectors are all included in every kit.

Yes. EVZA raceways are made from flame-retardant PVC rated to IEC 60695 standards, which is the same standard used in commercial cable management. Power cables and signal cables can share the same raceway safely. However, we recommend keeping high-wattage cables (e.g., extension cords carrying multiple devices) in a ventilated environment.